NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Can't upgrade my firmware (to V2.2.1.20)
Trying to upgrade firmware for RBK50 (AC3000) kit - router and satelite - from original V1.8.0.6 to the latest V2.2.1.20. Auto update reports that V1.8.0.6 is the latest version and when Manual upg...
- To complete the firmware upgrade I had to first do several of the firmwares before the current. Pick one that is a few above your version and see if it takes it. If not go one above your version. At some point one of them allowed me to go to the latest so you won’t have to do everyone between your current version and the latest. Fustrating process but it got me to current.
Thank you both Gary_A and FURRYe38.
I installed V2.0.0.74 as suggested on both the S & R - and after a reboot and resync - I was 'cooking with gas'! As I logged back into the Router the firmware update menu gave me the option of updating to V2.2.1.20! Excellent.... Appreciation and Kudos to both of you. Gummo
Enjoy. :smileywink:
Gummo wrote:
Thank you both Gary_A and FURRYe38.
I installed V2.0.0.74 as suggested on both the S & R - and after a reboot and resync - I was 'cooking with gas'! As I logged back into the Router the firmware update menu gave me the option of updating to V2.2.1.20! Excellent.... Appreciation and Kudos to both of you. Gummo
Thanks for the veery helpful advice but after updating this F/W is just not good enough! With V2.2.1.20 my download speed dropped from a steady 220mbps (excellent in the UK) to a jittery 86mbps (at best)! Have now rolled back to V1.8.0.6 and my speed is back to its previous level! After looking through previous NC postings about Orbi F/W rollouts, from V2.0 onwards, is it possible that V2.2.1.20 is another 'iffy' product in the real world? I love the kit but.................. Gummo
Have you done a full factory erase on the router and setup from scratch and walk thru the setup wizard?
What is the Mfr and model# of the ISP modem the NG router is connected too?
Are you speed testing with a wire connected PC to the router?
Gummo wrote:
Thanks for the veery helpful advice but after updating this F/W is just not good enough! With V2.2.1.20 my download speed dropped from a steady 220mbps (excellent in the UK) to a jittery 86mbps (at best)! Have now rolled back to V1.8.0.6 and my speed is back to its previous level! After looking through previous NC postings about Orbi F/W rollouts, from V2.0 onwards, is it possible that V2.2.1.20 is another 'iffy' product in the real world? I love the kit but.................. Gummo
