NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
smalldog
Feb 12, 2020Tutor
chromebook orbi DNS Server
Just purchased Orbi mesh router and now lenovo chromebook shows connection to wifi but when attempting to load webpages responds there is no intent connection. Diagnostic reports - No function DNS ...
- Apr 06, 2020
So.... if that happens to you, all you have to do is reset everything by restarting modem, router and device.
Thanks to all who offered suggestions.
sd
Krb78
Apr 01, 2020Aspirant
I am also getting issues with my kids chromebooks from school not operating properly when connected to the orbi mesh. I’ve had to disconnect it to get them working without errors- same with the smart TVs - 401 and 404 errors all over the place. Turn off the mesh, and it works perfectly (but then we are living w slow speeds) 🤦🏻♀️
FURRYe38
Apr 02, 2020Guru - Experienced User
What model Orbi do you have?
What is the Mfr and model# of the ISP modem/ONT the NG router is connected too?
Is Circle enabled on the RBR?
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s).
Krb78 wrote:
I am also getting issues with my kids chromebooks from school not operating properly when connected to the orbi mesh. I’ve had to disconnect it to get them working without errors- same with the smart TVs - 401 and 404 errors all over the place. Turn off the mesh, and it works perfectly (but then we are living w slow speeds) 🤦🏻♀️