Different SSID

Please post about this over on the main Orbi forum:

https://community.netgear.com/t5/Orbi/bd-p/Orbi

You would probably run the Orib system in AP mode:

Modem Combo Units:
This would be a double NAT condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop

No the RBS have to be connected to the back of the RBR or RBR via a ethernet switch connected to the back of the RBR an the RBS connected to this LAN switch. 

---

ronothan wrote:
Would love love some help with setup

I have a router which is used for one business and has the SSID “business-wifi”. This modem/router connects directly to the internet.

I’d like to set up the Orbi via wired backhaul to the business-wifi router, with a different SSID called airbnb-wifi

How would I set that up?

And also, can I have the satellites connect to the business-wifi via wired backhaul without a problem!?

---