Hardwired Orbi shows offline satellites.

Just wanted to provide full details in case someone else finds it useful:

Hardware List:

- Orbi RBR50 Router, Firmware v2.7.2.102

- Orbi RBS50 (x2), Firmware v2.7.2.102

Internet/Wiring Setup:

- Internet Via Frontier Fios, skipped over the Frontier Modem and routed directly to the RBR50 Router using the "internet" port (yellow port on far left)

- Connected a Router ethernet port to a Gigabit Switch (TP-Link 8 Port GigabitEthernet Network Switch (TL-SG108))

ack.

- I had to reset Satellites to Factory, and re-establish the backhaul connection first however prior to wiring to the switch.  I synced over wireless, and verified the backhaul wireless connection was successful.

- I then ran ethernet connections from the Gigabit Switch to the RBS50 satellites.  Within a few minutes, the router correctly configured to a wired connection (see screenshot)

All is working as desired now!

Thanks for all the help!