NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
I replaced with RBK50, But still 866mbps speed at router?
Hello, All. I hope all you guys are doing well in COVID-19 Pendemic situation. I've been using AT&T1gbps fiber internet plan more than 2 years. I thought 1gbps meaning is download speed + up...
Is this speed result wired or wireles? If wireless, then you not see more than 866Mpbs or anything near 900Mpbs on wireless. Most wifi devices max out at 400-500Mpbs on 5Ghz AC.
If you have wired PC or laptop, then you should see near 900Mpbs on the 1000Mpb connection rated LAN cable line with the PC or laptop.
If your ISP modem has a built in router, This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop
No, I've checked the speed test in Orbi App. So, It is speed test Orbi router and AT&T modem(Pace 5268ac) with wired option.
AT&T Modem already in DMZ+ mode which is similar Bridg mode and I change Orbi BRB50 into router mode.
But whether I get RBR50 with AP mode or Roouter mode, Speed is always 500~550 in download and 300~330mbps in upload.
Probvably it should be 800 ~900 in bothway because, it is RBR50 which has 1733mbps Backhaul speed.
Wired Yes, Wiress no. The wireless backhaul speed is between the RBR and RBS ONLY. Not for wireless connected devices.
Front haul between the RBS/RBR and any connected wireless devices that supports that rate on 5Ghz AC for the connection rate ONLY will be 866Mbps.
Wired Yes, Wireless no.
I menat why Speed test in Orbi showing 500 ~ 550 mbps in download and 300 ~ 330 mbps in upload. That speed test is not for wireless.
RBR50 is wired to AT&T modem , and AT&T modem is getting 900mbps in bothway from AT&T. But, Why RBR50 can't show that much speed If I check RBR50 speed test in ORBI App.
What others have seen with your model mode:
Modem FW may have broke good speeds between the modem and Orbi in router mode:
https://community.netgear.com/t5/Orbi/RBK50-Speed-Throttling-Wired-and-Wireless/td-p/1673291/jump-to/first-unread-messagehttps://community.netgear.com/t5/Orbi/Installing-Orbi-behind-ATT-Pace-5268AC-gateway/td-p/1234191
https://community.netgear.com/t5/Orbi/Netgear-Orbi-and-ATT-Pace-5268-Router/m-p/1786833/highlight/true#M68004
https://community.netgear.com/t5/Orbi/ATT-fiber-BGW210-and-costco-RBR50-RBS50/m-p/1868313#M83488https://community.netgear.com/t5/Orbi/How-I-fixed-our-intermittent-internet-connectivity-problems-with/td-p/1688722/jump-to/first-unread-message
https://community.netgear.com/t5/Orbi/Orbi-RBR50-Slow-Wired-WAN-after-2-2-1-210-Upgrade/m-p/1676934/highlight/true#M47457