NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Internet Issue on RBR40 starting Daylight saving day
I have RBR40 with latest firmware and having internet issue starting Daylight saving day. I even tried reverting old firmware and disabling traffic meter but no luck so far. There were few instances w...
Please try a factory reset and setup from scratch with the RBR and RBS.
Power OFF The ISP Modem as well for 30 seconds then back on. Walk thru the setup wizard and be sure to write down all important information. Be sure not to enable Armor, Circle, Access Controls, QoS or Traffic Meter on the RBR.
Has Armor or Circle been enabled?
Has a factory reset been performed and setup from scratch?
No for all the questions.
Please try a factory reset and setup from scratch with the RBR and RBS.
Power OFF The ISP Modem as well for 30 seconds then back on. Walk thru the setup wizard and be sure to write down all important information. Be sure not to enable Armor, Circle, Access Controls, QoS or Traffic Meter on the RBR.- Is factory reset only the solution? I got tons of smart devices which I will have to reset again to connect to my wifi if it works after the factory reset :catsad:
sanjeev40084 wrote:
Is factory reset only the solution? I got tons of smart devices which I will have to reset again to connect to my wifi if it works after the factory reset :catsad:Generally you do not need to reconfigure or redo the setup for devices as long as you keep the same SSID and security setting. Many Orbi customers replace their old router with a new Orbi router, use the same SSID, and all their smart devices still work and connect to the new Orbi wireless network.
So factory reset your Orbi, setup its wireless network in the same way and using the same SSID, and then your smart devices should connect again automatically.
