NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Is it possible to connect one satellite wired and the other through Wifi
Since couple days I own a RBK53v2 Mesh Wifi system. One of my satellites has sometimes poor connection (it even connects on 2.4GHz time to time) to avoid bad connection on this satellite, I have...
Thanks for the suggestions, I have been bussy last 30 minutes running between the satellites and the router, checked the cable with a network tester and everything seems to be okay.
Just before I perform a factory reset rebooted everything and now it suddendly connected through the wire. I am a happy with the setup now, it was bugging me a little.
Just to give you a idea, we have 3 floor house, at first floor I have the router and sateliets are on each other floor. All 3 mounted with a 3D printed holders.
The router is taken out the closet where the modem and other electronics devices are, it was getting hot in the closet in the summer months, so I hope this helps.
https://i.imgur.com/GfrP2rQ.jpg
Once again thanks for the help.
Hope it's working well. if so, be sure to do a back up configuration to file on the RBR for safe keeping. Saves time if you have to reset the RRR in the future.
Spawn3D wrote:Thanks for the suggestions, I have been bussy last 30 minutes running between the satellites and the router, checked the cable with a network tester and everything seems to be okay.
Just before I perform a factory reset rebooted everything and now it suddendly connected through the wire. I am a happy with the setup now, it was bugging me a little.
Just to give you a idea, we have 3 floor house, at first floor I have the router and sateliets are on each other floor. All 3 mounted with a 3D printed holders.
The router is taken out the closet where the modem and other electronics devices are, it was getting hot in the closet in the summer months, so I hope this helps.
https://i.imgur.com/GfrP2rQ.jpg
Once again thanks for the help.
