NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Is my internal performance OK
Looking to see if I am pushing my ORBI's to the limit or if I have another problem.
Problem: I have to run the Security Cameras at a lower res and lower fps that I would like.
Here is s snaps...
Jroach wrote:
........... Same with the 2.4 vs 5, both drop frames.
...........
One last thing to test! Packet drops can also be caused by the fragmentation thresholds. Default CTS/RTS Threshold is 2347 for both 2.4 and 5 GHz bands. Please try to change those something lower, start with 2307 and then try different values between this figure and 2347.
There are far more performance measurements than what is found in this table.... each Orbi is a CPU in itself with related RAM etc.
Go to the debug screen for each device (Router and satellite) -- e.g. 192.168.1.1/debug and see what those parameters are as well.
I wouldnt change anything in there, just look to see what it says.
Chuck, thanks.
I get a 404 with "/debug"
Did I misunderstand your directions?
Under advance setting there are some stats for the Orbi but those are by the day, month, etc.
I'm trying to do some basic PD ie: is this a camera issue or am I throwing too much at the network.
You have to go to 192.168.1.1/debug.htm to get to that page.
randomousity,
Thanks. I started the capture....but where do I find the logs?
