NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Is my internal performance OK
Looking to see if I am pushing my ORBI's to the limit or if I have another problem.
Problem: I have to run the Security Cameras at a lower res and lower fps that I would like.
Here is s snaps...
Jroach wrote:
........... Same with the 2.4 vs 5, both drop frames.
...........
One last thing to test! Packet drops can also be caused by the fragmentation thresholds. Default CTS/RTS Threshold is 2347 for both 2.4 and 5 GHz bands. Please try to change those something lower, start with 2307 and then try different values between this figure and 2347.
ekhali,
I had played around with teh 20/40 coexist when I first picked up the ORBI. I didn't find any difference in performance but I've tweaked a lot of things so its worth trying again. Same with the 2.4 vs 5, both drop frames.
WWM is set on.
Daisychain is set to off. I bring this up because I think that Netgear had me turn this off when I first bought the ORBI and I thought I saw a post that it was OK to turn it back on again.
Jroach wrote:
........... Same with the 2.4 vs 5, both drop frames.
...........
One last thing to test! Packet drops can also be caused by the fragmentation thresholds. Default CTS/RTS Threshold is 2347 for both 2.4 and 5 GHz bands. Please try to change those something lower, start with 2307 and then try different values between this figure and 2347.
ekhalil,
Thanks for the advice.
I've changed it to 2307 and will test/monitor and report back.
Best.