LBR20 lte port forwarding not working

NETGEAR Moderator

May 09, 2022

Hi styvy,

I understand that you would like more information to successfully implement port forwarding on your LBR20.

I have included steps below on how to port forward with the LBR20:

Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding/Port Triggering page displays
Leave the Port Forwarding radio button selected as the service type.
Click the Add Custom Service button. The Ports - Custom Services page displays.
In the Service Name field, enter a descriptive name.
In the Protocol menu, select the protocol. If you are unsure, select TCP/UDP.
In the External Port range field, enter the port numbers.
Specify the internal ports by one of these methods:
Leave the Use the same port range for the Internal port check box selected.
Type the port numbers in the Internal port range field.
Type the IP address in the Internal IP address fields or select the radio button for an attached device listed in the table.
Click the Apply button. The service is now in the list on the Port Forwarding/Port Triggering page

For more information on port forwarding please navigate to the link below (page 122):

Best,

Kevin

Community Team

Forum Discussion