NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
New - RBR50 / RBS50 Firmware Version 2.7.4.24 Released
New Features and Enhancements:
Admin password brute force attack prevention
Admin password strength enforcement
EU data analytics opt-out
Bug Fixes:
The backup config file i...
Hi lvangent ,
Did you enable this function ' Disconnect and disable the internet connection ' in traffic meter ?
Hi,
thanks for the suggestion but
No I did not select this as I have unlimited internet quota. I just want to keep track of how much data is download/upload as we have a lot of streaming happening, remote school and working from home.
cheers
RBR50 + 2 RBS50 sats FW V2.7.3.22
Issuse is that my WIFI network device list contains improper IP address when viewed from the Attached Devices page on the RBR50 web interface.
Network is 10.0.0.x but find duplicate provisioned addresses: ex 192.168.168.100 is there 7 times indicated that is was provided by the RBR50 mostly but also from either of the RBS50's
This condition results in the WIFI network not working at all.
I spent several hours resetting the RBR50 and two RBS50's to factory defaults and then doing a total reinstall and now after less than a day the system has the same duplicate IPs just like it was prior to the reinstall with the above duplicate IPs and non functioning wireless internet.
I will try the new firmware V2.7.3.24 but after looking at the update description feel that this will just be another 5 hours of waisted time.
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Please post a screen shot of what your seeing.
What devices do you have connected?
Has a power off for 1 minute then back ON with the ISP modem and router been performed since last update?
1-prop-head wrote:
RBR50 + 2 RBS50 sats FW V2.7.3.22
Issuse is that my WIFI network device list contains improper IP address when viewed from the Attached Devices page on the RBR50 web interface.
Network is 10.0.0.x but find duplicate provisioned addresses: ex 192.168.168.100 is there 7 times indicated that is was provided by the RBR50 mostly but also from either of the RBS50's
This condition results in the WIFI network not working at all.
I spent several hours resetting the RBR50 and two RBS50's to factory defaults and then doing a total reinstall and now after less than a day the system has the same duplicate IPs just like it was prior to the reinstall with the above duplicate IPs and non functioning wireless internet.
I will try the new firmware V2.7.3.24 but after looking at the update description feel that this will just be another 5 hours of waisted time.
1-prop-head wrote:
Network is 10.0.0.x but find duplicate provisioned addresses: ex 192.168.168.100 is there 7 times indicated that is was provided by the RBR50 mostly but also from either of the RBS50's
Can you please expand on this:
- That's a typo, correct. It should read 192.168.1.100?
- Seven different MAC addresses appear in the Attached Devices list with the same IP of 192.168.1.100?
- What sort of devices have this incorrect IP address?
- Is it possible to look at the network setup of any of these devices to see their gateway address?
There is a very good chance that there is another DHCP server on the network somewhere, buried in some product.
Hi,
Apple products have the feature of "Private Wi-Fi Address (MAC)".
This means that every time an iPhone, MacBook, iPad connects to the Wi-Fi it will have a different MAC address.
Could this be the case?
Just a thought.
