New Firmware 2.3.5.30

Retired_Member
Oct 14, 2019
AFD wrote:
I didn't perform any action from my side to perform the update . I assume it was an auto update .
It's a disaster , also WiFi is unstable . Let's see if I have some time today to rollback . For the moment, status is : all the devices connected to the main router with the mentioned problems .
Do you have another router in your network?
- AFD
  Luminary
  Oct 14, 2019
  To the question if I have another router in my network . Answer is no . I don't have any router in my network just the Orbi System .
AFD
Luminary
Oct 16, 2019
Start testing with the following Steps

1 - Start disconnection (turn off-on) of each device thta supposed to be connected to the satellite (more than 20 devices)
2 - Verify the connections
3 - Depending on the results 1-2 go to factory reset and reinstall 2.3.1.44 (manually)
4 - Restore the previously config file saved 2 months ago .

Thanks for all the collaboration and support . Im going to keep you informed about the results

By the way , it seems that unstable wifi is better now (I dont know why , because I didn't perform any action , but let's see)
- AFD
  Luminary
  Oct 17, 2019
  Problem solved(??) for the moment , status follows
  This is the Method I used in my case
  
  1 - Factory reset
  2 - Manual installation Firmware 2.3.1.44
  3 - Load Configuration file from Backup
  4 - Testing everything with old firmware (OK)
  5 - Manual installation Firmware 2.3.5.30
  6 - Turn OFF/ON all the devices that supposed to be connected to the satellite
  7 - Testing everything since 2 hours ago (seems to be ok)
  
  Let's see what happen . Firmware 2.3.5.30 (up and running) .
  - FURRYe38
    Guru - Experienced User
    Oct 18, 2019
    Keep us posted on how it goes. A factory reset seems to help resolve some issues. Also manual load of FW files is good too.

Forum Discussion