NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi connection to cell phone
I live in a remote mountain area and use Viasat as my internet connection. Not good and expensive.What Orbi hardware do I need to connect to an iPhone 11 using AT&T as a provider?
First off, does your ISP provide you with a modem that has a built in router? If so, This would be a double NAT (two router) condition which isn't recommended if you choose to install a Orbi system. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop
https://kb.netgear.com/26765/Disabled-Features-on-the-Router-when-set-to-AP-Mode
You can review the Orbi LTE system if you wan to use a cell service provider for your connection:
https://community.netgear.com/t5/Orbi-LTE/bd-p/en-home-orbi-lte