NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Orbi Firmware update 2.5.0.38 problems
Have a 2 year old RBR50 with 2 satellites - have had no problems until recent update to 2.5.0.38. Everything is working howerever the GUI now has issues when attempting to display devices. The web ...
The reset and setup from scratch on the RBR will probably fix the issues your seeing. Try then when your ready.
RonRolfsen wrote:After several reboots still have the problems (no Main page, no devices attached). I wanted to downgrade to 2.5.0.30 but now when I go to the Advanced-Administration-Firmware Update in the web gui get the:
400 Bad Request
This server does not support the operation requested by your client.
Mobile app does not allow a firmware downgrade as far as I can tell.
Is there a way to telnet into the router and downgrade the firmware?
(have not yet tried reset - saving as last resort since things are 'working')
I updated to the new firmware (v2.5.0.38) a couple of days ago and since then I feel my satellite router is not picking up devices correctly. I have my two routers on opposite sides of my main floor. If I stand right next to my satellite with my iPhone then I can see my phone as one of the devices. However, I move into the kitchen (same side of the house and less than ten feet from the satellite and only going through one wall) then I do not see my phone as one of it's devices. The phone connectors to the main router on the other side of the house (through a wall and a stone fireplace). Needless to say when I do a speed test it is less than a quarter of the speed to my house.
StevenKY wrote:If I stand right next to my satellite with my iPhone then I can see my phone as one of the devices. However, I move into the kitchen (same side of the house and less than ten feet from the satellite and only going through one wall) then I do not see my phone as one of it's devices.
Do you have "Fast Roaming" enabled? On the Orbi web interface, Advanced Tab->Advanced Setup->Wireless Settings, at the very bottom of the screen.
StevenKY wrote:I updated to the new firmware (v2.5.0.38) a couple of days ago ....
WHY???
