NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
orbi keeps rebooting
my orbi reboots a few times a day. support suggested 1. updating to the latest firmware 2. disabling my verizon wifi with these instructions - https://kb.netgear.com/31100/How-do-I-set-up-my-Orb...
Hi bigmoviebuff
Welcome to NETGEAR Community!
To clarify, when you say Orbi reboots, do you mean the device turns off and on?
Regards,
Blanca
Community Team
the router flashes white for about a minute.
Also the logs in the admin section clears.
What Firmware is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?Has a factory reset and setup from scratch been performed since last update?
Is there a buit in router and wifi with the ISP modem? If so, This would be a double NAT condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktopWhat Firmware is currently loaded?
I updated to the latest one - 2.5.1.8 it seems to help. less reboots now but it still happens every few hours.
What is the Mfr and model# of the ISP modem the NG router is connected too?actiontec MI424WR Rev 1
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
i used the default - auto. Also switched it to a manual channel and neither makes a difference
Any Wifi Neighbors near by? If so, how many?yes many. I live in nyc in a large apartment complex. maybe around 10
Has a factory reset and setup from scratch been performed since last update?
yes
i already tried switching to AP mode and disabling the wireless on my fios modem
(this was mentioned in my first post)
is it hardware related? Is it possible i have a defective orbi router?
Has a factory reset and setup from scratch been performed since last update?
Possible the system is faulty, if it continues to exhibit this problem after a reset.
