NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
AnnieBelle
Jun 18, 2020Follower
Orbi Model RBK50 When syncing the satellite does the light pulse on stay on steady when synced?
I am having a hard time connecting my robot vac to the internet. and I am wondering if the satellite orbi is synced with the main router. I get a blue color but it is pulsing and not staying on ste...
FURRYe38
Jun 18, 2020Guru - Experienced User
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
https://kb.netgear.com/19668/Link-Rate-and-Transfer-Speed
Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s).
AnnieBelle wrote:I am having a hard time connecting my robot vac to the internet. and I am wondering if the satellite orbi is synced with the main router. I get a blue color but it is pulsing and not staying on steady. What am I doing wrong. Our tvs are connected ok.