Orbi RB 50 Iphone disconnects

FURRYe38, Hi!

Thanks for your quick support, again.

A general question, will the configurations mentioned below have any limitation of the usage of my Orbi e.g.

-Amount devices connected? 

-Kind of devices connected?

-My house will be having many devices connected, hence I am aiming to have a very connected home.

- Have you forgot the wifi profile on the iphones then reboot them, then re-connect to the SSID and PW?

Update: Checked yesterday again and it still works well

- What is the Mfr and model# of the ISP modem the NG router is connected too?

Update: Its an Icotera 6400

- What is the size of your home? Sq Ft? 

2500 SQFT two floors, but for now I am only testing it in my living room, then I will extend the test to the kitechen and so on...

-What is the distance between the router and satellite(s)? 30 feet is recommended in between them to begin with depending upon building materials when wirelessly connected.

Update: Willl connect the sat today. Let hope for the best.

-Any Wifi Neighbors near by? If so, how many?

Not to many, 5-6 wiifis in range of the house

-What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.Update

Update: WIll check today

- What WPA security modes are you using?

Update: Will check today

- Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings

Update: Will do today

- Try disabling the following and see:
Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).

Update: Will do today