NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi RBK 23 - ethernet port issues on Router
we have just purchased an Orbi RBK23 pack (router plus 2 satelites). System all set up and wifi working. Attempting to connect Netgear GS105 Switch to the Ethernet port on the Router but not gettin...
Which modem are you using?
What firmware is on there?
Are you setting it up as follows:
modem------->wan port on RBR20----------lan port------gs105.
have you tried any of the other ports?
Different cables?
Modem provided by ISP - Arris CM 8200
Modem connected to “Internet” Port on router and switch to “Ethernet” port - only 2 ports
Have upgraded switch to GS305e today as support believes it may be an issue with VLAN but still having no luck - in q again now for support
Modem connected to “Internet” Port on router and switch to “Ethernet” port - only 2 ports
Have upgraded switch to GS305e today as support believes it may be an issue with VLAN but still having no luck - in q again now for support
Posty71 wrote:
Modem provided by ISP - Arris CM 8200
Modem connected to “Internet” Port on router and switch to “Ethernet” port - only 2 ports
Have upgraded switch to GS305e today as support believes it may be an issue with VLAN but still having no luck - in q again now for supportYou're not talking the other port on the modem are you? If so, the SB8200 from arris can only use 1 port unless you have the following:
1. A router with wan aggregation. Which the RBK23 kit isn't.
2. A ISP that allows more than 1 public IP address. The vast majority don't allow more than 1 public ip address.
So just to clarify, the switch is connected to the orbi and not to the modem, correct?