NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
jpress55
Mar 20, 2020Follower
Orbi RBR20 with 2 Satellites paired with Netgear CM400 Cable Modem - slow connectivity vs Linksys
Old setup: Xfinity NetGear CM400 Cable Modem Linksys EA7500 Wifi Router (no sattelites) Download Speeds consistantly around 150 MBps Amazon Firesticks and Alexa devices working consistently on 5...
FURRYe38
Mar 20, 2020Guru - Experienced User
What Firmware version is currently loaded?
What is the Mfr and model# of the ethernet switch in the configuration?
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings. You can turn down the power on the 2.4Ghz radio as well to see if this helps direct devices to connect to 5ghz instead. It's up to them to connect to which frequency they choose too.
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s).