ORBI RBR50 adds satellites as devices - not as satellite

What Firmware version is currently loaded?

Be sure same FW version is loaded on the RBS as whats on the RBR.

What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended. 

What is the size of your home? Sq Ft?
What is the distance between the router and 📡 satellite(s)? 30 feet or more is recommended in between RBR and RBS📡 to begin with depending upon building materials when wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite 📡

What channels are you using? Auto? Try Auto and 48 on 5Ghz. Or try setting manual channel 1, 6 or 11 on 2.4Ghz and 40 to 48 channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?

One User Experience/Configuration:
https://community.netgear.com/t5/Orbi/Most-Stable-Orbi-Configuration/m-p/1941087/highlight/true#M97026

---

marcgroet wrote:

Hi,

I am adding satellites to my ORBI RBR50 and they are recognised as devices. 

So they are not recognised as satellites extending the wifi network.

 

Any tips?

Thanks,

Marc

---