NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ORBI RBR50 multiple wifi disconnection
Hi All, i am having some issues with RBR50 every few hours my wifi is diconnect for a few secondes and return back I thought that the problem was with the RBS50 so i disconnect it and i was s...
Hi
i am using V2.3.5.30 which is offical FW (as far as i know)
i did it using the Orbi admin page (i didn't download anything or at least i don't rember)
i tried every solution that i found but nothing worked
any sugestion i will be glad to try becuse right now the situation is not great :)
What is the Mfr and model# of the ISP modem the NG router is connected too?
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).
My RBK50 is working on with the above suggestions and on v2.5.1.8.
ygarti wrote:Hi
i am using V2.3.5.30 which is offical FW (as far as i know)
i did it using the Orbi admin page (i didn't download anything or at least i don't rember)
i tried every solution that i found but nothing worked
any sugestion i will be glad to try becuse right now the situation is not great :)