lately connectivity has been not so smooth, i started noticing periodic short hangs using remote screens between computers on the same wifi lan at home. AT&T Wifi also gets pretty bad receptions, audio cutting out, eventhough wifi signal was full and internet speed checked out okey.

I started doing basic pings, while pinging ORBI/router resulted fine, pinging nodes on the wifi lan seemed otherwise. I've narrowed down to pinging devices from RBR50 client to RBR50 client are okey, but client on RBR50 pinging RBS50 client resulted bad latency. Here's short example

64 bytes from 192.168.1.10: icmp_seq=10 ttl=64 time=54.778 ms

64 bytes from 192.168.1.10: icmp_seq=11 ttl=64 time=338.627 ms

64 bytes from 192.168.1.10: icmp_seq=12 ttl=64 time=155.053 ms

64 bytes from 192.168.1.10: icmp_seq=13 ttl=64 time=833.066 ms

64 bytes from 192.168.1.10: icmp_seq=14 ttl=64 time=608.371 ms

64 bytes from 192.168.1.10: icmp_seq=15 ttl=64 time=47.884 ms

64 bytes from 192.168.1.10: icmp_seq=16 ttl=64 time=243.209 ms

64 bytes from 192.168.1.10: icmp_seq=17 ttl=64 time=59.144 ms

64 bytes from 192.168.1.10: icmp_seq=18 ttl=64 time=6.472 ms

64 bytes from 192.168.1.10: icmp_seq=19 ttl=64 time=518.175 ms

I have obviously rebooted/power cycled each RBR/RBS50, internet modem, client devices ( laptop, appletv, webcam etc ) and both RBR/RBS50 running same and latest FW. Nothing made difference...

RBR50 and RBS50 have a few walls and about 25-30 ft apart.

The web app also doesn't seem to list out all devices, only some... and per RBR/RBS device listing is always empty

Forum Discussion

ORBI RBR/RBS50 sporatic latencies between hosts on the same wifi lan FW V2.5.1.8