NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
orbi RBS20
I recently purchased an Orbi Sattellite RBS20 to add Wifi coverage in my house. My existing router is an RBR20. I have tried setting up the new sattellite through the phone app and it will not jo...
It is an Arris 27BC from Windstream. It works fine with the existing Orbi router with 1 sattellite. Just can't get the new sattellite to communicate with the system. Thanks.
The FW maybe out of sync on the newer RBS.
You need to update the RBS before updating the RBR. Keep this in mind for future updates.
What you need to do is factory reset the RBS. Wire connect a PC to the 1st satellite. Already have the most current FW version files downloaded on to this PC.
Wire connect 1 PC to the back of the RBS. Factory reset the RBS, wait about 5 minutes. The PC will get a IP address from the satellite. The RBS will be 192.168.1.250. Use this IP address in a web browser to log in to the satellites web page. Log in as admin and password. Use the satellites web page FW update feature to select the FW update file that was unpacked from the .zip file. Then factory reset and then re-sync the satellites to the RBR.
- Thanks. I’ll give that a try. Guessing there’s also a way to change ID and PW so they all match, while doing that? Or will that be a separate step?
No. Once you get the RBS updated to same version of FW, then hit the resync button on the RBR and RBS and the RBS will get all configuration information from the RBR. Then you'll be good to go.