NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Orbi router does not recognize satellites connected to the switch
good morning everyone! I have encountered an annoying problem that has been taking time and I honestly don't know what to do. I've been trying to install a switch (dlink DGS 1008A) for two days on my ...
- Then the new switch arrived (a TP-Link model) and ... it worked! Apparently the problem was the switch! Thank you all guys!
how it it connected?
it should go:
gateway----->wan port on orbi router------>lan port on router to switch------>satellites.
Hi!
It is connected like this:
ISP Modem -----> Orbi internet port (Orbi is in router mode) -----> LAN port on Orbi router to LAN port on switch -----> Orbi Satellite connected at switch's LAN
what firmware is on the router and on the satellites?
Have you tried a different switch?
They all are using the latest firmware (V2.5.1.16)
I bought a new switch and it should probably arrive today. But a behavior that I found strange is that if I connect the switch to a free port on some satellite, everything works normally. The problem is when I connect a satellite directly to the switch.
What is the Mfr and model# of the ethernet switch in the configuration?
- Then the new switch arrived (a TP-Link model) and ... it worked! Apparently the problem was the switch! Thank you all guys!
