NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Orbi Satellite Will Not Factory Reset or connect to router?
Thought I would try the wired backhaul on my setup again. Wrong move doing so has bricked the satellite. Pushing the reset has no affect power light never changes from green. Also no halo lights ever...
Not sure if this will work:
https://kb.netgear.com/000059633/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP-client
Try using the TFTP client thats built into windows as well...
It is out of warranty and the cost the replace just a satellite is only $25.00 less than a whole new set. I would still like to fix this if at all possible. I have seen links where you can use telnet for firmware updates on the router. Wondering if that is possible on the satellite?
I have already bought a replacement. But if I could fix this I could sell the old set to help get back some money.
Not sure if this will work:
https://kb.netgear.com/000059633/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP-client
Try using the TFTP client thats built into windows as well...
Thanks I'll try this after the holidays.
FURRYe38 wrote:
Not sure if this will work:
https://kb.netgear.com/000059633/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP-client
Try using the TFTP client thats built into windows as well...
Hope it works for you. Good Luck.