NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi with 4 satelites- Some devices are connecting to satelites further away. How do I change that?
I have a orbi system with 4 satelites and I have some devices for what ever reason has connected to orbis that are further away. How can I change that? Is there away to tell the orbi system what s...
Any progress on this?
Rikerrock wrote:
I have a orbi system with 4 satelites and I have some devices for what ever reason has connected to orbis that are further away. How can I change that? Is there away to tell the orbi system what satelites devices can use?
I've tried telling my amcrest camera to connect to the satelite that has the strongest signal but it keeps going to the one that has the least.
Is there a way to temp turn an orbi satelite without unplugging it?
THanks
Latest firmware. V2.3.1.48
The orbi connects to a frontier fios unit.
Router mode
approx 3700sqft home
All satelites are connected via a gigabit wire.
I have the router in the garage.
Satelite near family room and then one in my office; Approx 40-50 feet apart.
Second story one on one side of house above the family room and the other above my office about 60 feet away from each other.
Backhaul tried turning off from on.
The other two mimo and beamforming checked
The media one is checked
2.4 set to auto
5 ghz set to 48
Thanks
Rikerrock wrote:
Latest firmware. V2.3.1.48
The orbi connects to a frontier fios unit. Whats the MFr and model of this unit?
Router mode
approx 3700sqft home
All satelites are connected via a gigabit wire.
Are they all connected to the back of the RBR or thru a LAN switch?
I have the router in the garage.
Satelite near family room and then one in my office; Approx 40-50 feet apart.
Second story one on one side of house above the family room and the other above my office about 60 feet away from each other.
Backhaul tried turning off from on.
The other two mimo and beamforming checked. Daisy chain should be disabled.
The media one is checked
2.4 set to auto
5 ghz set to 48
Thanks