NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Franky_D
Dec 22, 2020Aspirant
RBK23 boot up time
Hello Community, I recently purchased Orbi RBK23 (router and two sattelites). First observation was, that it took a bit too long to boot up. It takes around 5 minutes. The first day when I wa...
FURRYe38
Dec 22, 2020Guru
Ya, shouldnt take that long.
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Franky_D
Dec 22, 2020Aspirant
FURRYe38 wrote:Ya, shouldnt take that long.
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
It is the latest Firmware on all units (router and two sattelites) - V2.5.1.16. I bought all few days ago. While setting all up, the firmware got updated automatically. I have not had a chance to try it with old firmware.
It is cable modem/router is Sagemcom FAST 3890 V3. I am using Orbi in a router mode.
- FURRYe38Dec 22, 2020Guru
Has a power off for 1 minute then back ON with the ISP modem and Orbi system been performed since last update?
What mode is your modem working in? If router mode, This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop