NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBK50
My orbi RBK50 randomly reboot once a while, sometimes during daytime when kids are in classes. What could cause this random rebooting, is there any setting that I can use to prevent it from rebooting...
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet or more is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
What devices do you have connected while running during the day?
Try enabling Beamforming and MIMO(MIMO may or may not be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s).
One User Experience/Configuration:
https://community.netgear.com/t5/Orbi/Most-Stable-Orbi-Configuration/m-p/1941087/highlight/true#M97026
Has a factory reset and setup from scratch been performed since last FW update?
What Firmware version is currently loaded? V2.7.0.70 for router, V2.6.1.4 for satellite, both latest
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too? Motorola Surfboard SB6183What is the size of your home? Sq Ft? 3500 sq ft, router in master closet, one satellite downstairs near stairs
What is the distance between the router and satellite(s)? 30 feet or more is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected.Not sure how far it is, but I think the distance is not short because sometimes I have to move satellite a little bit to get blue light on satellite to connect
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz. Yes Auto, auto on 2.4Ghz, 48 on 5 Ghz
Any Wifi Neighbors near by? If so, how many? yes, I can see 4 wifi, but very weak signalWhat devices do you have connected while running during the day? 5 laptops, 5 phones, 1 ipad
Try enabling Beamforming and MIMO(MIMO may or may not be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings Just did
Try disabling the following and see: just did
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s).One User Experience/Configuration:
https://community.netgear.com/t5/Orbi/Most-Stable-Orbi-Configuration/m-p/1941087/highlight/true#M970...Has a factory reset and setup from scratch been performed since last FW update? No
arrayprofile wrote:What Firmware version is currently loaded? V2.7.0.70 for router, V2.6.1.4 for satellite, both latest
Ok, so there is a more recent version of v2.7x out and you may want to update to it on both RBR and RBS. RBS and RBR need to be running same version of FW, not different:
https://community.netgear.com/t5/Orbi/New-RBR50-RBS50-Firmware-Version-v2-7-1-60-Officially-Released/m-p/1998052/highlight/true#M105952What is the size of your home? Sq Ft? 3500 sq ft, router in master closet, one satellite downstairs near stairs
What is the distance between the router and satellite(s)? 30 feet or more is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected.Not sure how far it is, but I think the distance is not short because sometimes I have to move satellite a little bit to get blue light on satellite to connect. I would try to measure the distance to be sure.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satelliteHas a factory reset and setup from scratch been performed since last FW update? No
Lets power OFF the RBR and RBS for 30 seconds than back ON, after you get the system updated.
What Firmware version is currently loaded? V2.7.0.70 for router, V2.6.1.4 for satellite, both latest
Ok, so there is a more recent version of v2.7x out and you may want to update to it on both RBR and RBS. RBS and RBR need to be running same version of FW, not different:
When I logged into my router and satellite, it shows "No new firmware version available". My satellite is RBS40V, router is RBR50.Has a factory reset and setup from scratch been performed since last FW update? No
Lets power OFF the RBR and RBS for 30 seconds than back ON, after you get the system updated.
Is this how to do factory reset by powering OFF for 30 seconds and then back ON? Then yes, I have done factory reset many times in the past.