RBR 50 And backhall

What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected.

What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?

Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings

Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).

---

Signetone8 wrote:
RBR 50 and RBS50
After an automatic firmware update to
2.3.5.30
The backhsul status I noticed is poor.
That’s from the website but on the app the green has changed to orange on the satellite.
They have both been green since installation. . Any suggestions please to correct this issue.
Both have been restarted but not touched sync or reboot.
Thanks
Brian

---