NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBR20 Internet drops when setting static IP
Hi, I am trying to enable VPN on my Orbi RBR20. I am aware I need to set a static IP and I have a static IP from my ISP. When I set the Orbi to use a static IP so that I can enable the VPN I lo...
Taz_AU wrote:
I am trying to enable VPN on my Orbi RBR20. I am aware I need to set a static IP and I have a static IP from my ISP. When I set the Orbi to use a static IP so that I can enable the VPN I lose internet connectivity. If I dont have the static IP selected the Orbi will not enable VPN.
Orbi does not require a static IP to enable OpenVPN. I have OpenVPN enabled on two Orbi systems and neither has a static IP.
Setting a static IP is done on the Orbi web interface, Basic Tab, Internet Menu. In addition to the IP itself, the subnet mask and gateway IP must be correct (the ISP should have supplied those). In addition, my guess is that the DNS servers must be defined rather than "Get automatically from ISP". Without the subnet mask, gateway, and DSN entries, there will be no interent.
Thanks but my Orbi will not enable VPN unless static IP is set up. The other option is to enable dynamic dns. Is that what you did?
As mentioned I have found the correct setting page and entered all three IP addresses and the DNS address. It’s when I do this that I lose connection
As mentioned I have found the correct setting page and entered all three IP addresses and the DNS address. It’s when I do this that I lose connection
Taz_AU wrote:
Thanks but my Orbi will not enable VPN unless static IP is set up. The other option is to enable dynamic dns. Is that what you did?
As mentioned I have found the correct setting page and entered all three IP addresses and the DNS address. It’s when I do this that I lose connectionIt has been two years since I set up OpenVPN. I do not remember any option besides DDNS, which is what I did.
(Probably being picky, but...) You entered the IP address, subnet mask, and gateway. Not three IP addresses, correct?
Do you have a computer that can be connected directly to the ISP modem? (desktop, laptop?) I would set that computer to the static IP parameters provided by the ISP and connect it directly to the modem.
- Hi, yes the subnet mask and gateway are set correctly.
I will try to do it with DDNS rather than a static and see if it works.I have always been to cheap to pay for a static IP address, so I have no experience with "how it works".
When you look at the IP address that has been assigned by the ISP, does it match the static IP address that you got from them?
Getting a static IP address to work has no logical connection with OpenVPN. If the Orbi loses internet when the static IP information is entered, that is a much bigger problem than OpenVPN.