RBR20 Most Stable Firmware?

What Firmware version is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?

What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router

What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?

Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings

Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s).

---

emma5 wrote:

---

rich1233211 wrote:

I am currently on V2.1.4.16. Without getting into it, I setup orbi at my family home and now that I come and visit for holidays I notice the wifi is total garbage. Satelites keep daisy chaining incorrectly and frequent wifi cut outs and super slow speeds. fences What is the most stable FW you guys have had in your experience?

---

How did you resolve this, please let me know.

Thanks

Emma

---