NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Mkimble02's avatar
Mkimble02
Follower
Jan 31, 2020

RBR20 with RBW30 WiFi Speed

I have an RBR20 with 2 RBW30 Satellites. When running a speed test from WiFi I can barely break 200mbps, when plugged in to main router, I can get over 500mbps (my subscription). Do the satellites not support speeds over 200mbps?

1 Reply

  • FURRYe38's avatar
    FURRYe38
    Guru - Experienced User
    Jan 31, 2020

    What Firmware is currently loaded?
    What is the Mfr and model# of the ISP modem the NG router is connected too?

     

    What WiFi devices are you using to speed test. Some WiFi devices maybe maxed out or limited by there design. Most current devices should see any where from 400-500Mpbs depending upong connection rate. 

     

    What connection rate is the wifi devices connected? Use WiFi Sweet Spots on your mobile device to see the connetion rate. 

    Ensure your device is connected to 5Ghz instead of 2.4Ghz. 


    What is the size of your home? Sq Ft?
    What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router

     

    What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
    Any Wifi Neighbors near by? If so, how many?

    Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings

    Try disabling the following and see:
    Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).