NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Rbr40 wifi slow
I have rbr40 orbi. Firmware 2.7.3.22. When I connect lan cable to modem the speed is 400+ mbps. When I check speed in orbi app the max speed it takes is only around 90mbs. What could be the problem ...
What modem do you have?
Have you tried replacing the cable between modem/router with a decent quality cat 6 cable?
A sketch cat 5e cable can drop the connection from gigabit to 10/100mbps connections.
What speeds do you get hardwired into the rbr40?
- Modem is provided by my internet provider.
When I connect a wire between modem and a laptop the speed is 400mbps.
ISP Modem is connected to orbi rbr40 .
The speed of wifi is only 90mbps.
rahuldba wrote:
Modem is provided by my internet provider.---And what model is it? Thats key.
When I connect a wire between modem and a laptop the speed is 400mbps.
ISP Modem is connected to orbi rbr40 .---did you check the wan port statistics to see if its connected at gigabit speeds?
https://kb.netgear.com/24222/How-do-I-display-Internet-port-statistics-on-my-Nighthawk-router
The speed of wifi is only 90mbps.---what wired speeds do you get? Again, another key. Orbi's do bandsteering and 2.4ghz is much slower than 5ghz. So if you're speedtesting on a device connected to 2.4ghz, 90 mbps is actually pretty amazing. and what device are you testing on? a device with only a 1x1 antenna is going to have half the speed of a 2x2 antenna device.What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Do you have Armor, Circle or Traffic Meter enabled on the RBR?
- Modem is actiontec t3200.
I don't have armor or any other features enabled on rbr40.
The modem does give speed of 400mbps when connected to laptop using network cable. So does the model # matter much in this case ?
