NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

OldFot's avatar
OldFot
Follower
Jul 16, 2020

RBR40 with 4 RBS20 and Daisy Chaning. Need to reboot a single RBS20 remotely

I have an RBR40 with 4 RBS40 Satellites at a remote location supporting Security Cameras. When I remotely reboot the system one of the Satellites does not connect to the nearest Satellite, but connec...
FURRYe38's avatar
FURRYe38
Guru - Experienced User
Jul 16, 2020

I use these to power OFF remote RBS:

https://www.synaccess-net.com

OldFot wrote:

I have an RBR40 with 4 RBS40 Satellites at a remote location supporting Security Cameras. When I remotely reboot the system one of the Satellites does not connect to the nearest Satellite, but connects to a more distant satellite that results in a poor backhaul condition. If I were at the site fixing the problem would be a simple unplug replug of the Satellite with the poor backhaul. However, there is no way to remotely power cycle a single satellite. I can access the satellite remotely via port 80 and port forwarding, but there is no way to reboot or sync available. Please improve the capabilities of the Orbi System by implementing a way to remotely reboot a Satellite.