NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

BillYoung's avatar
BillYoung
Luminary
Mar 16, 2021
Solved

RBR50 - 2.7.2.104 firmware - Issues?

To whom it may concern, FURRYe38: After upgrading my firmware to 2.7.2.104, I have been having issues.  Devices successfully connect to the Orbi, but have no internet.  If I reboot the Orbi and ...
  • BillYoung's avatar
    BillYoung
    Mar 16, 2021

    Hi FURRYe38:

     

    So far so good (very short timeframe).  Also, changed the NTP server from Netgear's to time.nist.gov.  If I continue to have connectivity issues, I'll do the factory reset and re-setup from scratch.  Thanks for your help.

BAM2019's avatar
BAM2019
Star
Mar 20, 2021

Ok, so ORBI firmware "V2.7.2.104" is ok as long as the Traffic Meter is unchecked (off).  And just to be sure you say it is ok to check the box next to Daylight Savings Time to "Automatically adjust for daylight savings time" and this should be turned on?  And I have a check next to "Use default NETGEAR NTP server" is ok too?  

 

Again, thank  you for your help :)

FURRYe38's avatar
FURRYe38
Guru
Mar 20, 2021

Yes and Yes. 

BAM2019 wrote:

Ok, so ORBI firmware "V2.7.2.104" is ok as long as the Traffic Meter is unchecked (off).  And just to be sure you say it is ok to check the box next to Daylight Savings Time to "Automatically adjust for daylight savings time" and this should be turned on?  And I have a check next to "Use default NETGEAR NTP server" is ok too?  

 

Again, thank  you for your help :)