NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBR50 - No Internet connection
I’m having the same problem. Also connected to AT&T fiber modem/router. Setup has worked fine for almost 3 years until about a week ago. Modem is set to IP Passthrough and both wifi channels are turn...
Yes all the IP Passthrough settings are the same as that article.
For Advanced > Advanced Setup, I don’t see anything called Internet Settings but I do have Wireless Settings.
Region: North America
Under 2.4GHz
SSID Broadcast is checked
20/40 MHz Coexistence is checked
Enable WMM settings is checked
CTS/RTS Threshold 2347
Preamble Mode Automatic
Transmit Power is 100%
Under 5GHz
Same settings (except 20/40 since it isn’t an option)
Daisy-chain is unchecked (I only have one satellite)
Implicit BEAMFORMING unchecked
MU-MIMO checked
Fast Roaming unchecked
For Advanced > Advanced Setup, I don’t see anything called Internet Settings but I do have Wireless Settings.
Region: North America
Under 2.4GHz
SSID Broadcast is checked
20/40 MHz Coexistence is checked
Enable WMM settings is checked
CTS/RTS Threshold 2347
Preamble Mode Automatic
Transmit Power is 100%
Under 5GHz
Same settings (except 20/40 since it isn’t an option)
Daisy-chain is unchecked (I only have one satellite)
Implicit BEAMFORMING unchecked
MU-MIMO checked
Fast Roaming unchecked
Please provide the settings under > ADVANCED > Setup > Internet Setup
Oops. I guess it would help if I could read!
Required login - No
Internet IP Address - Get dynamically from ISP
Domain Name Address - get automatically from ISP
Router MAC address - use default address
Blank under DHCP options
Belovednewo wrote:
......
Internet IP Address - Get dynamically from ISP
....Do you see assigned IP address, mask and gateway address under this part?
Yes