NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBR50 bricked again, during update to 2.7.3.22, power LED only sold green
Man am I sick of this! I have been putting off updating to 2.7.3.22, but decided to try it because I want the security fixes. After "update all" from the web GUI the wifi came up again as exp...
I don't know if this is too late for you, but my I had to load firmware into my RBR40 and only got the green light like you said.
After trying may things, I noticed that if I held the reset button in while booting the light flashed (orange/red), but went to green as soon as I released it.
I tried again and could ping it at 192.168.1.1 while holding in the reset and the light was flashing (after power on).
I then tried to do the tftp while still holding down the reset button and it worked.
Good luck.
After trying may things, I noticed that if I held the reset button in while booting the light flashed (orange/red), but went to green as soon as I released it.
I tried again and could ping it at 192.168.1.1 while holding in the reset and the light was flashing (after power on).
I then tried to do the tftp while still holding down the reset button and it worked.
Good luck.
wwlen1 wrote:
I don't know if this is too late for you, but my I had to load firmware into my RBR40 and only got the green light like you said.
After trying may things, I noticed that if I held the reset button in while booting the light flashed (orange/red), but went to green as soon as I released it.
I tried again and could ping it at 192.168.1.1 while holding in the reset and the light was flashing (after power on).
I then tried to do the tftp while still holding down the reset button and it worked.
I do not get any reaction at all holding in the reset button, during power-up or otherwise. Still tried pinging 192.168.1.1 during boot with and without the reset button. Nothing.