NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBR50 generating resolving hosts error
I have 1 RBR50 and 3 RBS50 units. Often (> 50%) I an receiving a 'resolving hosts' error on my computer. I find that I am connected to the nearest RBS50 with a stong signal. I then connect to ...
What FW version are you using?
Have you set up any reserved IP addresses ON the router for your PCs and devices?
The firmware level is V2.1.2.18
I have no reserved addresses. I know networking and this is baffling.
Try the new v2.1.3.4. Do a factory reset on both router and Satellites then set up from scratch. Skip setting up the Satellites.
I would also do a IPCONFIG /release, then /renew then /flushdns on your PCs. Reboot reset of mobile devices AFTER you have set up the router.
Test. Then set up the Satellites.
Did you find a solution? I am having the same problem (Resolving Host error...)
What model Orbi system do you have?
What FW version are you using?
Have you set up any reserved IP addresses ON the router for your PCs and devices?
lindsay_s_Chi wrote:
Did you find a solution? I am having the same problem (Resolving Host error...)