NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RBR50 poner IP FIJA a los dispositivos conectados.
Hola buenas tardes. Necesito por favor instrucciones para poner IP fija a todos los dispositivos que conecte al Sistema RBR50, incluso al mismo Router. Gracias
This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop
Please, I need instructions or explanation to put fixed or static IP, in the router, in the satellite and in the devices that connect to the RBR50.
This is my router.
Thank you
Refer to page 73 of the user manual for setting "reserved" IP addresses ON the RBR for your devices. You can set a reserved IP address for the RBS as well:
https://www.downloads.netgear.com/files/GDC/RBK50/Orbi_UM_EN.pdf
Thanks for your reply. In the manual it is indicated that the IPs start with 192.x.x.x., however I have them as 10.x.x.x.
Attached several images for you to check.
If I click add, it shows all the devices, and I select 1, it adds them to fixed IP, I imagine.
The images are in Spanish.
If you have 10.something, then your RBR is configured for 10.0.1.1 or something like that. This only happens if your RBR detects a up stream router in front of the RBR that uses 192.168.1.1. The RbR changes to 10.something to avoid the conflict.
Do you have another router infront of the RBR?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?