NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

gburra63's avatar
gburra63
Aspirant
May 04, 2022

RBR50 says not connected to Internet but I am still online

Hello, I have an RBR50 with 4 satellites attached to it. The RBR50 connects to my broadband modem. I am able to go online without any problems. However, when I go to the Orbi tool, I get the error me...
  • gburra63's avatar
    gburra63
    Aspirant
    May 05, 2022

    Thanks for your response. 

     

    If it were a double NAT, I don't understand how I am actually able to be on-line - in other words, wouldn't that prevent me from getting internet access due to the two NAT's fighting each other? 

     

    Thanks

    • plemans's avatar
      plemans
      Guru - Experienced User
      May 06, 2022

      When you're in a double nat, some people experience different issues. Usually you're still online but the process that checks if you're online, doesn't function properly. Thats why you're online but not showing as online (usually)

      • gburra63's avatar
        gburra63
        Aspirant
        May 06, 2022

        Hi again, sorry for the bother, but I am still not able to resolve this. Here is my set up

         

        Xfinity modem that is NOT in Bridge mode (the wifi on this modem has been shut off) --> This is the one that is eventually connecting to the outside world (and so is not in Bridge mode)

         

        Connected via ethernet to RBR50 that is in Router mode to which I have 4 satellites (2 RBW30, 1 RBS50 and 1RBV40) connected via mesh. The firmware on the RBR50 is current (v2.7.3.22)

         

        I have completely reset my Orbi system and re-configured it again (twice). I am still getting the same issue

         

        I am failing to see where the NAT conflict is. In other words, there is only one place - am i right? 

         

        Thanks again for all the help.