NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBR50 with network switch dropping wired connections
Hi folks, I wired our house for ethernet this summer to support the increased bandwidth uses due to work from home and remote learning. Most everything is going well and we have a wide variety of d...
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
What happens if you remove all switch and wire connect what you can to the RBR? Still see problems?
Firmware: Was on 2.5.1.16, currently on the Voxel V9.2.5.2.5.2SF-HW
Modem: Calid 716GE-I on TDS fiber
The issue does occur whether the offending device is on the netwoork switch or in the back of the RDR50, it appears. Also seems to happen when I unplug my USB-C ethernet connection from the external monitor connected to the MacBook Pro. Had a hypothesis that wifi network hopping between the router and the satellite was the issue but that doesn't seem to hold up.
A couple of interesting observations from looking at the wire traffic:
The ARP table entry for the problematic Win10 box keeps coming back incomplete, missing a MAC address:
? (192.168.1.11) at (incomplete) on en0 ifscope [ethernet]
The Obi200 box that controls the phone line (which is slow to recover when this happens) seems to be continually broadcasting ARP requests that the router is not responding to.
168924 2553.205834 ObihaiTe_64:e4:f9 Broadcast ARP 60 Who has 192.168.1.1? Tell 192.168.1.20
You might want to contact the Mfr of this device to see if there is more information regarding this particular device. Maybe causing problems with the Orbi system.