NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Rbr50v2 Problems getting online. It say I'm connected but my phone ,Xbox one, can't connect.
Bedroom
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Is the Orbi system operating in Router or AP mode?
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s).
No copy pasting please
Don't tell others what do to please. This isn't your forum.
If you have a problem with users, you should contact netgear forum support.
BoilerPlate wrote:Don't tell others what do to please. This isn't your forum.
If you have a problem with users, you should contact netgear forum support.
Never claimed it was. Haven't we met before?
Forum support is fully aware of your friends faulty advice and they choose to turn their heads. That might because he's a moderator wannabe in cognito
