NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RBS50 SATELLITE NOT RESPONSIVE
First off, I'm not a technically minded user - just a sole trader working from home with a need for a stable network. I have a Orbis RBR50 Router with two satellites which are operating well with...
All
Thanks for your help and suggestions!
I've been able to solve the problem with the help of a local Netgear accredited supplier and the issue related to corrupt firmware on the satellite in question. The power light blinked green upon startup then flashed red after approximately 15 seconds and continued to do so with the LED flashing white throughout.
The issue was that the firmware could not update wirelessly and so had to be hard wired and firmware updated in sequence: According to my supplier he had to TFTP to the unit, then apply the following firmware levels in sequence:-
- 2.7.2.104
- 2.7.3.22
- 2.7.4.24
Taking the unit directly to 2.7.4.24 failed
It is now working and re-connected to my network. Thanks to all DK986
If it is less than one year old, you can ask to have it replaced under the hardware warranty.
If not, I would first swap the power adapter with one of the other adapters. Chances are that the power adapter is fine, but "you never know until ...."
It is probably a good idea to read the instructions on using nmrpflash at
https://github.com/jclehner/nmrpflash
People who enjoy this sort of thing might welcome the opportunity. For others, buying a used RBS50 on eBay would be hands down the better choice.