Re: Orbi RBS50 stuck on Config Sync

Thanks for this thread.  Was having the same problem.  I found I only had to connect the RBS50 to the RBR50 with an ethernet cable temporarily.  After about 5 minutes the Backhaul Status changed from ConfigSync to Good.  Then I unplugged it and moved it back to its original location and the status has stayed Good.  It's a three satellite wireless mesh arrangement in Access Point Mode with a Firewalla Gold as the router.  The router is centrally located in the middle of the property inside the main house.   The satellites are located halfway to the property lines.  I get great coverage over the entire house, outside structures, and property (10,500 sq ft).  It is generally reliable.