NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Repeated Orbi Wifi drops
Using the RBR20 router with one RBS20 satellite Router Firmware Version V2.3.5.36 <3,000 ft single story home Satellite to base station about 30 ft (some normal frame walls between) Distance to satell...
Has a factory reset and setup from scratch been performed since last FW update?
https://kb.netgear.com/31486/How-do-I-reset-my-Orbi-system-to-factory-default-settings
iOSBoss wrote:
Using the RBR20 router with one RBS20 satellite Router Firmware Version V2.3.5.36 <3,000 ft single story home Satellite to base station about 30 ft (some normal frame walls between) Distance to satellite - <3 ft Very stable internet connection via Arris SB6183 cable modem Distance to nearest neighbor is at least 200 ft. My Wifi signal strength is 4/4 bars on both main and guest network. I can max two other Wifi networks with 2 bars or less of signal. As has been reported by others, the Wifi simply hangs multiple times an hour. It's a brief pause - usually around 30 seconds +/- before everything resumes. I have extensively played around with config changes including: - Manually setting 2.4 and 5GHz channel (current setting is 04 and 36 respectively) - Enabled/disabled WMM (Wi-Fi multimedia) settings (currently disabled) - Enabled/disabled Daisy-Chain Topology (currently disabled) - Enabled/disabled Implicit BEAMFORMING (currently enabled) - Enabled/disabled MU-MIMO (currently disabled) - Enabled/disabled Fast Roaming (currently disabled) There are too many permutations of these to try them all, but the problem persists. Any other suggestions? Thanks in advance!