NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
radtech48
Dec 20, 2019Aspirant
router faster than modem combo?
I just installed the Orbi CBR40 modem/router combo with 2 satellites. fairly easy to install, but upon doing a speed test, I'm only getting around 215mbps. Before installing this, I had purchased an ...
FURRYe38
Jan 04, 2020Guru - Experienced User
What Firmware is currently loaded?
What are the speeds if you use a wired PC and Ooklaas Speed Test app?
Ensure the ISP has checked the signal and line quality up to the modem/router.
Be sure there are no coax cable line splitters in between the ISP service box and the modem.
Ensure your using good quality RG-6 Coax cabling.
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).
Has a factory reset and setup from scratch been performed since last update?