NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Satellite connecting and disconnecting
Hi! I'm having an issue where one of my Satellite's seems to keep disconnecting and reconnecting. I have a base router and two satellites. My house is about 3000 SQ FT but I have 3 to cover the di...
Do both satellites disconnect or just one?
Yes concrete and metal will impact signal and range. So you may need to move the farthest one a bit closer.
Might try disabling MIMO, Daisy Chaing and Fast Roaming.
Set manual channels on 2.4ghz to 1, 6 or 11 and any unused channel on 5Ghz. Try 48.
- I haven’t noticed the “Satellite 1” disconnecting (which is downstairs) but I don’t see it as often. Downstairs is the master bedroom. Upstairs is my office and I work from home so I see it in my peripheral vision all of the time and it drops the WI-FI briefly on my work PC which is impactful.
The challenge I have with moving it is that I have two devices hardwired into the satellite upstairs.
Is there no access to any more advanced logs? Even through a CLI or something?
I had everything working fine for quite some time and this arose over the past month so I’m fairly certain it is a firmware situation or similar. This is why I am weary of making some of the proposed changes...
I’m also considering swapping sat1 and sat2 to see if that does anything...Try that. Also try a factory reset and set up from scratch as well...
Disable the advanced wifi features and try some manual channels as well.