NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Satellite RBS50 non su connette a router RBR50
Buongiorno a tutti,
ho un problema con il secondo satellite RBS50, che si connette ma non si sincronizza con il router RBR50.
Alla prima installazione funziona tutto, ma quando metto il r...
Ok so placement will be key here. I would start with just one satelite first. When you reset the satellite, hold in the reset button until the top led turns on AMBER, then let go. Led should blink WHITE then plusate WHITE, then hit the synce button the router then satellite to add it. Give it a few minutes. Top led should turn on BLUE and then go out.
Besure to put in a check mark for Daisy chain.
I would see if you can get the satellite to connect while in the same room as the router. If you can get it connected here and remain connected with out Pink appearing on top, then go for remote placement. If walls are thick, then try setting out at 20 feet and test.
Nothing...
I pressed the reset button, the top led continued pulsing white, the power red went from solid orange, to blinking orange to green.
When I left it the top led became blue for a few seconds, then blinked amber and then rebooted.
Tried to sync but magenta again
Let us know how it goes if you contacted NG support.
Augusto_meltin wrote:
Nothing...
I pressed the reset button, the top led continued pulsing white, the power red went from solid orange, to blinking orange to green.
When I left it the top led became blue for a few seconds, then blinked amber and then rebooted.
Tried to sync but magenta again