NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Slow speed on RB50 on BT FTTP 900
Hello all, I am wondering whether anyone can shed some light on why my Orbi router only achieves speeds of around 460 mbps when connected directly to the BT open reach box on my wall when the hom...
Hello SimonP71,
Welcome to the NETGEAR Community!
I understand that you are having speed issues with your RBR50. Try changing the channel settings on your RBR50 to improve your network speed. The best practice is to use channels 1,6 or 11 for your 2.4Ghz network band and 36, 40, 44, or 48 for the 5Ghz network band.
To change the network channel on your RBR50 please follow the directions below:
- Navigate to Orbilogin.com
- Select Wireless
- Select "channel menu"
- Select desired channel
Best,
Kevin
Community Team
Thank you for your help so far. I have updated the firmware. For some reason, the Orbi app said it wasn’t available, so had to sort hat manually. I am now the most recent.
I have changed the channels for 2.4 and 5ghz to what you suggest, but speed tests are the same 460Mbps.
I’m at a loss with this to be honest.
Are you testing speeds with a wireless device or a wired device. You should be seeing near 900Mpbs with a ethernet connected PC if it's connecting at 1000Mbps to the back of the router after a reset and setup from scratch. Don't enable Armor, Access Controls, Circle or Traffic Meter. Don't use a saved backup configuration file.
Wireless device, you'll not see much over 300-500Mpbs on 5Ghz AC due to limitations of devices and connections rates at 80Mhz seen here. Nature of this beast.
- Hello. Thanks for the reply. No I am not testing via wireless. I understand the limitations of wireless connections.
I am testing at router level, using the Orbi router connected directly to fibre. I am running the speed test via the router option.Have you tested with a different wired pc to compare results?
