NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Slow Speeds Orbi RBR50
Hello,
I am having slower than normal speeds with my Orbi. I have gigabit internet through ATT. I used to have speeds 800-900Mbs wired and 300-400 over Wifi. But now currently having 90-100Mbs over Wifi. With hard reset of Orbi, I have a return of initial speeds but after a couple hours it returns back to 90-100Mbs. I have even installed previous versions of firmware. Only thing that returns my speeds are hard reset of the router.
Any suggestions?
I am having slower than normal speeds with my Orbi. I have gigabit internet through ATT. I used to have speeds 800-900Mbs wired and 300-400 over Wifi. But now currently having 90-100Mbs over Wifi. With hard reset of Orbi, I have a return of initial speeds but after a couple hours it returns back to 90-100Mbs. I have even installed previous versions of firmware. Only thing that returns my speeds are hard reset of the router.
Any suggestions?
1 Reply
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet or more is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satelliteWhat channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and 40 to 48 channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
https://kb.netgear.com/19668/Link-Rate-and-Transfer-SpeedTry enabling Beamforming and MIMO(MIMO may or may not be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
Try disabling the following and see:
Armor, Circle, Daisy Chain, Traffic Meter, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s).One User Experience/Configuration:
https://community.netgear.com/t5/Orbi/Most-Stable-Orbi-Configuration/m-p/1941087/highlight/true#M97026
You can find other speed diagnosis steps in the community faq: https://community.netgear.com/t5/Orbi-AX/Community-FAQ-My-Orbi-speeds-are-slow-inconsistent-and-don-t-my/m-p/1982974/highlight/true#M7849
